Building Stairs in a New Home



Posted: Thursday, October 16, 2008

by Rickie Bell
Habe Construction

Stair building methods have not changed much over the years, but with the advent of stricter local building codes in recent years it has become more of an exacting science. Many localities have enacted ordinances that must be adhered to in order to pass the house framing inspection. The days of building steps that are not safe to navigate, lack proper headroom, built shoddily, or too steep have long since passed by.

If you are a general or house framing contractor, you must be familiar with these local codes in order to be successful. In the area where I live they can vary greatly from one jurisdiction to the next, sometimes from one side of the street to the other due to urban sprawl.

Stair Building Guidelines

These are the most common codes in my area for single family dwellings and will probably differ slightly in yours, always check with your local building department .

Failure to follow local guidelines will probably result in the staircase failing inspection and costing time and money.

Tips



  1. The process for building stairs always begins with finding the rise and run and dividing them into even comfortable increments. No matter what type (straight, 90 degree L - shaped, winders, 180 degree U - shaped, or curved) the process always begins this way.
  2. The last thing you need is a squeaky set of steps, use a liberal amount of glue, anytime wood contacts wood.
  3. Measure three - four times and cut only once.
  4. If you plan to carpet the stairs a little money can be saved by using 3/4" scraps left over from the sub floor as risers.


Rickie Bell, the author of this article is a professional house framing carpenter with nearly thirty years of custom home building experience in the Chicago area. His website contains extensive information about building stairs and other aspects of custom home building.

This Article has been viewed 141 times. (Not updated in real-time.)
No comments yet.
We want your comments! If you can read this, you don't have javascript enabled, so you can't use this comment system. Please enable javascript.